| 摘要: |
| 目的 通过试验建立有区分能力的溶出曲线测定条件,考察自制片与原研片体外溶出曲线的一致性。方法 分别在美国食品药品监督管理局公布的溶出曲线条件(pH 6.0缓冲液),转速50 rpm和75 rpm,溶出介质900 mL;在不同浓度(0.2%、0.3%、0.5%)的SDS的水溶液,转速50 rpm,溶出介质900 mL;不同pH(1.2、4.5、6.8)缓冲液,转速50 rpm,溶出介质900 mL条件进行溶出曲线考察。结果 原研片在0.3% SDS(十二烷基硫酸钠)溶出曲线条件认为有区分能力,自制片与原研片在多条溶出介质中的f2值大于50或15 min累积溶出大于85%。结论 通过试验建立了有区分力的体外溶出曲线条件,试验结果表明自制片与原研片的溶出行为基本一致,为一致性评价提供试验依据。 |
| 关键词: 仿制药 非布司他 溶出曲线 一致性评价 |
| DOI:10.13506/j.cnki.jpr.2017.02.007 |
| 基金项目:国家战略性新兴产业发展专项资金计划项目(No.发改办高技〔2013〕2557) |
|
|
|
| Comparative study on the dissolution curves of Febuxostat Tablet |
| MA Wenxia1,TANG Chunyan2,LIU Qiumin1,FAN Zhongshu1 |
| (1.Hangzhou Zhuyangxin Pharmaceutical Co.,Ltd.,Hangzhou 310018,China;2.The Third Affiliated Hospital of Zhejiang Chinese Medical University,Hangzhou 310005,China) |
| Abstract: |
| Objective To confirm the measurement conditions of dissolution curves which have distinguished capability and to investigate the consistency of the in vitro dissolution behavior of self-made tablets and the original tablets.Methods To compare the dissolution curves of self-made tablets and the original tablets in different conditions. The chosen dissolving conditions are pH 6.0 buffer solution(FDA announced conditions), 50 rpm and 75 rpm, 900 mL dissolution solution; 0.2%, 0.3% and 0.5% SDS in water, 50 rpm, 900 mL dissolution solution; pH 1.2, pH 4.5 and pH 6.8 buffer solution, 50 rpm, 900 mL dissolution solution.Results The dissolution behavior of the original sample under 0.3% SDS condition was more ideal.The f2 value of the self-made sample and the original sample was greater than 50 or in 15 min the cumulative dissolution was more than 85%.Conclusion Results showed that the dissolution behavior of the self-made samples was basically the same as that of the original sample. To provide experimental basis for generic drugs quality consistency evaluation. |
| Key words: Generic drugs Febuxostat Dissolution curve Consistency evaluation |