• 首页
  • 关于期刊
    期刊简介
    编委会
    青年编委会
    合作单位
    《药学研究》编辑部
  • 投稿指南
  • 制度与声明
    出版伦理规范
    学术不端声明
    开放获取(OA)声明
    AIGC工具使用声明
  • 期刊订阅
  • 下载中心
  • English
引用本文:陈保垒,朱俊,卢嘉彤,金坚.驱动器的规格与吸入辅助装置对气雾剂体外沉积性质的影响[J].药学研究,2017,36(5):272-275[点击复制]
【打印本页】      【下载PDF全文】   【查看/发表评论】  【下载PDF阅读器】  【关闭】
←前一篇|后一篇→ 过刊浏览    高级检索
本文已被:浏览 4198次   下载 3247次 本文二维码信息
码上扫一扫!
驱动器的规格与吸入辅助装置对气雾剂体外沉积性质的影响
陈保垒,朱俊,卢嘉彤,金坚
字体:加大+|默认|缩小-
(江南大学药学院,江苏 无锡 214122)
摘要:
目的 考察驱动器的规格——孔径、孔长以及吸入辅助装置的使用对气雾剂体外沉积性质的影响。方法 以自制丙酸氟替卡松混悬型气雾剂为模型药物,装配不同规格的驱动器,使用Andersen多级撞击器(Andersen cascade impactor, ACI)测定体外沉积率;将丙酸氟替卡松气雾剂装配筛选好的特定规格的驱动器,分别在不使用吸入辅助装置与使用吸入辅助装置的情况下,对体外沉积性质进行对比研究。结果 在孔径固定的情况下,随着孔长的延长,驱动器的残留量降低,Andersen多级撞击器装置的L型连接管沉积量增加,微细粒子剂量降低。在孔长固定的情况下,随着孔径的增加,驱动器的残留量降低,Andersen多级撞击器装置的L型连接管沉积量增加,微细粒子剂量降低。根据试验结果、混选型气雾剂本身的剂型特点以及驱动器的实际使用情况,最终,将0.42 mm孔径,0.70 mm孔长的驱动器作为优选驱动器;在使用吸入辅助装置的情况下Andersen多级撞击器装置L型连接管的沉积量极大地降低,微细粒子剂量增加,原来沉积在L型连接管的大粒子很大一部分被截留在吸入辅助装置当中。结论 驱动器的规格会对吸入气雾剂的体外沉积产生一定的影响,在药品研发的过程中,可根据气雾剂产品的具体特点(溶液型或混悬型,原料药的粒径大小等)进行驱动器的筛选;吸入辅助装置的使用可以提高气雾剂的药物利用率,推荐患者用药时使用。
关键词:  吸入气雾剂  驱动器  Andersen多级撞击器  吸入辅助装置
DOI:10.13506/j.cnki.jpr.2017.05.007
基金项目:国家自然科学基金面上项目(No.81273437)
Effect of actuator dimensions and add-on devices for inhalation on the deposition of metered dose inhaler in vitro
CHEN Baolei,ZHU Jun,LU Jiatong,JIN Jian
(Pharmacy College of Jiangnan University,Wuxi 214122,China)
Abstract:
Objective To investigate effects of actuator dimensions(the aperture and the hole length)and add-on devices for inhalation on the deposition of metered dose inhaler in vitro.Methods Self-made metered dose inhalers (MDI) of fluticasone propionate were selected as the model drug,and then assembled different dimensions of actuators.The deposition of metered dose inhaler in vitro was determined by Andersen cascade impactor (ACI).Fluticasone propionate aerosols were loaded on specific actuator.Thus,a comparative study was conducted in vitro deposition with and without add-on devices.Results When the value of aperture was fixed,increasing the hole length could reduce the amount of residue in the actuator and increase the drug deposited in the L type connection tube.Moreover,the deposition of fine particle distribution decreased slightly.Likewise,when the value of the hole length was fixed,increasing the diameter could reduce the amount of residue in the actuator and increase the amount of drug deposited in the L type connection tube.At the same time,the value of fine particle distribution was decreased.According to the experiment results, the characteristic of suspension aerosol and the actual use,actuator of 0.42 mm aperture and 0.70 mm hole length can be chosen as the priority.Add-on device can hold back the big particle,thus the drug deposition in the L type connection tube was greatly reduced,and the value of fine particle distribution is increased.Conclusion Actuator dimensions can affect the deposition of metered dose inhaler in vitro.According to the specific characteristics of aerosol products(solution or suspension,raw material particle size),actuators can be chosen in the drug research.The use of add-on devices can improve the drug utilization of aerosol,and it was recommend that patients use the add-on devices for inhalation.
Key words:  Metered dose inhaler  Actuator  Andersen cascade impactor  Add-on devices for inhalation
今日访问量:2493    总访问量:55338936
网站版权:《药学研究》编辑部     鲁ICP备17018036号-3     鲁公网安备 37010202001351号
主办:山东省食品药品检验研究院、山东省药学会 地址:山东省济南市高新区新泺大街2749号 邮政编码:250101
电话:0531-81216586 电子邮箱:yaoxueyanjiu@163.com;yaoxueyanjiu@126.com
技术支持:北京勤云科技有限公司