| 摘要: |
| 目的 为克服草乌甲素现有给药方式的不足,开展草乌甲素可溶性微针的制备工艺、质量评价及体外透皮性能研究。方法 采用分层浇筑法制备草乌甲素可溶性微针,通过正交法优选最佳处方及制备工艺,并对微针进行质量评价,如微针表观、机械强度、载药量、透皮释放等。结果 草乌甲素可溶性微针的最佳处方及制备工艺为:以35%乙醇溶液作为溶剂,0.3 g·mL-1的透明质酸(HA)和聚乙烯吡咯烷酮(PVP K30)(4:6)混合溶液,15%的聚乙烯醇(PVA)溶液作为背衬层基质,35℃下干燥制得含药量分别为150、100、70 μg 的微针。微针机械强度良好,能成功刺穿铝箔、刺入猪皮;体外透皮研究表明,微针在24 h时药物释放量达84.67%,48 h时释放量达96.41%。结论 成功制备了草乌甲素分层可溶性微针,实现了药物的有效经皮递送并达到缓释效果。 |
| 关键词: 草乌甲素 可溶性微针 正交 质量评价 |
| DOI:10.13506/j.cnki.jpr.2022.01.006 |
| 基金项目:云南特色资源保健食品及功能食品开发项目资助(No.2019DC008) |
|
出版日期:2022-01-25
|
|
| Preparation, quality evaluation and in vitro transdermal properties of Bulleyaconitine A dissolving microneedles |
| LI Ruiting1,LI Liyun2,3,SUN Wenqiang2,3,DING Jiangsheng2,3 |
| (1. Yunnan University of Traditional Chinese Medicine,Kunming 650500,China;2. Yunnan Institute of Materia Medica,Kunming 650111,China;3.Yunnan Province Company Key Laboratory for Traditional Chinese Medicine ang Ethnic Drug of New Durg Creation,Kunming 650111,China) |
| Abstract: |
| Objective In order to overcome the side effects of the existing administration methods of bulleyaconitine a, the preparation technology, characterization and in vitro transdermal properties of bulleyaconitine a dissolving microneedles were studied. Methods The dissolving microneedles of bulleyaconitine a were prepared by layered pouring method, and the optimal formulation and preparation technology were optimized by orthogonal design. The quality of microneedles was evaluated, such as the appearance, mechanical strength, drug loading, transdermal release, etc. Results The optimal formulation and preparation process of bulleyaconitine a dissolving microneedles were as follows: 35% ethanol solution as solvent, 0.3 g/mL hyaluronic acid (HA) and polyvinylpyrrolidone (PVP K30) (4:6) mixed solution, 15% polyvinyl alcohol (PVA) solution as backing substrate, and drying at 35 ℃ to prepare microneedles with drug contents of 150 μg, 100 μg and 70 μg, respectively. The results showed that the microneedles had good mechanical strength, and could successfully pierce aluminum foil and pig skin; in vitro transdermal study showed that the drug release of microneedles was 84.67% at 24 h and 96.41% at 48 h. Conclusion The layered dissolving microneedles of bulleyaconitine a are successfully prepared, which can achieve effective transdermal delivery and sustained-release effect. |
| Key words: Bulleyaconitine A Dissolving microneedle Orthogonal design Quality evaluation |