• 首页
  • 关于期刊
    期刊简介
    编委会
    青年编委会
    合作单位
    《药学研究》编辑部
  • 投稿指南
  • 制度与声明
    出版伦理规范
    学术不端声明
    开放获取(OA)声明
    AIGC工具使用声明
  • 期刊订阅
  • 下载中心
  • English
引用本文:黄翠苹,王玉青,张娜.基于QbD理念优化胞磷胆碱钠注射液生产工艺[J].药学研究,2024,43(5):444-448,486[点击复制]
【打印本页】      【下载PDF全文】   【查看/发表评论】  【下载PDF阅读器】  【关闭】
←前一篇|后一篇→ 过刊浏览    高级检索
本文已被:浏览 3110次   下载 2793次 本文二维码信息
码上扫一扫!
基于QbD理念优化胞磷胆碱钠注射液生产工艺
黄翠苹,王玉青,张娜
字体:加大+|默认|缩小-
(华润双鹤利民药业<济南>有限公司,山东 济南 250200)
摘要:
目的 基于质量源于设计(QbD)的理念,对胞磷胆碱钠注射液的生产工艺进行优化,确保产品安全、有效和质量可控。方法 基于QbD理念,确定胞磷胆碱钠注射液的质量概况(QTPP)、关键质量属性(CQA),结合对处方工艺变量的风险评估,对胞磷胆碱钠注射液进行配液、灭菌工艺研究,筛选并确定最佳工艺条件。结果 通过控制配液投料前注射用水温度40 ℃以下,调节pH值在6.2~8.0之间,采用终端灭菌工艺121 ℃/12 min,控制灭菌升温时间小于15 min,降温时间小于10 min,制备的产品质量符合要求。结论 化后工艺参数,可实现胞磷胆碱钠注射液终端灭菌,提高产品无菌水平,提高临床用药安全性。
关键词:  胞磷胆碱钠注射液  灭菌工艺  终端灭菌工艺  质量源于设计
DOI:10.13506/j.cnki.jpr.2024.05.006
基金项目:
出版日期:2024-05-25
Optimization of the production process of Citicoline Sodium Injection based on QbD
HUANG Cuiping,WANG Yuqing,ZHANG Na
(China Resources Double-Crane Limin Pharmaceutical Co., Ltd., Jinan 250200 ,China)
Abstract:
Objective Based on quality by design (QbD), the production process of Citicoline Sodium Injection was optimized to ensure product safety, effectiveness and quality control. Methods Based on the concept of QbD, the quality target product profile (QTPP) and the critical quality attributes (CQA) of Citicoline Sodium Injection were determined, and combined with the risk assessment of the process variables, the liquid dispensing and sterilization process of Citicoline Sodium Injection were studied, and the optimal process conditions were screened and determined.Results By controlling the temperature of water for injection below 40 ℃, adjusting the pH value between 6.2 and 8.0, using the terminal sterilization process 121 ℃/12 min, controlling the sterilization heating time less than 15 min, cooling time less than 10 min, the quality of the prepared products met the requirements.Conclusion Using the optimized process parameters, the terminal sterilization of citicoline Sodium Injection can be realized, the sterility level of the product can be improved, and the clinical drug safety can be improved.
Key words:  Citicoline Sodium Injection  Sterilization process  Terminal sterilization process
今日访问量:2489    总访问量:55338931
网站版权:《药学研究》编辑部     鲁ICP备17018036号-3     鲁公网安备 37010202001351号
主办:山东省食品药品检验研究院、山东省药学会 地址:山东省济南市高新区新泺大街2749号 邮政编码:250101
电话:0531-81216586 电子邮箱:yaoxueyanjiu@163.com;yaoxueyanjiu@126.com
技术支持:北京勤云科技有限公司