| 摘要: |
| 目的 优选心脑欣滴丸的最佳成型工艺。方法 以滴丸的外观及圆整度、沉降速度、平均丸重、重量差异限度和滴丸合格率等为评价指标,以正交试验法筛选滴丸基质种类、基质比例、冷凝剂、滴速、滴距、药液温度和冷凝温度等因素对滴丸制备过程中成型工艺的影响。结果 以PEG-4000: PEG-6000(1:8)为基质, 药粉与基质比例为 1:2,二甲硅油为冷凝剂, 滴速为50 滴/min, 滴距为8 cm,药液温度为80 ℃,冷凝温度为10~12 ℃为最佳滴制条件。结论 以该工艺制成的滴丸符合《中国药典》2015版要求,可适用于试验室制备和工业化生产。 |
| 关键词: 心脑欣滴丸 制备 正交试验 |
| DOI:10.13506/j.cnki.jpr.2016.12.008 |
| 基金项目: |
|
|
|
| Study on optimization of preparation technology for Xinnaoxin Dropping Pills by orthogonal test |
| LIU Yongxia1,WANG Yan2 |
| (1.Third People's Hospital of Rongcheng City,Rongcheng 264319,China;2.National Institutes for Food and Control,Beijing 100050,China) |
| Abstract: |
| Objective To establish the best forming preparation process for Xinnaoxin dropping pills.Methods Indicators for the evaluation of appearance and roundness,subsidence,mean weight,weight difference and qualified rate of dropping pills.The impact of the matrix type of drop pill,ratio of base condensing agent,speed,distance,liquid and condensingtemperature,using L9(34) orthogonal design the best molding process.Results The best preparation condition was PEG-4000 and PEG-6000 with a ratio of 1:8,Powder and matrix with a ratio of 1:2,condensing agent was dimethicone,drip system speed of 50 drops per minute,drip distance of 8 cm,liquid temperature of 80 degrees,condensing temperature is 10~12 degrees.Conclusion Drop pills made by the process fits the standard of CP2015,this preparation method is suitable for the laboratory test and the industrial production. |
| Key words: Xinnaoxin Dropping Pill Preparation Orthogonal design |