| 摘要: |
| 目的 对塑料输液容器用聚丙烯组合盖在穿刺时产生落屑的影响因素进行研究分析,改进组合盖以减少穿刺落屑。方法 通过研究组合盖的结构与材质对组合盖针刺落屑的影响确定最佳组合盖组成。结果 适量增加组合盖内盖配方中的弹性体、增加垫片的含胶量以及减小穿刺孔的厚度都可以显著提高组合盖的抗针刺落屑性能。结论 本文通过针对影响组合盖穿刺落屑的因素进行分析,可改善组合盖抗穿刺落屑的性能。 |
| 关键词: 塑料输液容器 组合盖 针刺落屑 |
| DOI:10.13506/j.cnki.jpr.2017.04.016 |
| 基金项目: |
|
|
|
| Factor analysis on fragmentation of polypropylene combination closures of plastic infusion containers |
| AN Yonghua1,REN Dayong1,QI Lin1,ZHAO Junlian2,LIU Zhenzhen2 |
| (1.Shandong Qidu Pharmaceutical Co.,Ltd.,Zibo 255400,China;2.Shandong Ujoin Medicial Technology Co.,Ltd.,Zibo 255400,China) |
| Abstract: |
| Objective To analysis the influencing factors of fragmentation when the polypropylene combination closures being penetrated,reduce the amount of the fragmentation by improving combination closures.Methods The best combination closures were decided by researching the effect of the structure and material of combination closures to the fragmentation of combination closures.Results Increase the amount of the elastomers in inner cover,increase the rubber content of gasket and reduce the thickness of the puncture may evidently improve the resist fragmentation properties of the combination closures.Conclusion This paper improved the resist fragmentation properties of the combination closures by analyzing factors influencing on fragmentation of combination closures. |
| Key words: Plastic infusion containers Combination closures Fragmentation |