• Home
  • About Journal
    Journal Introduction
    Editorial Board
    Youth Editorial Board
    Cooperating Institutions
    Editorial Department
  • Submission Guidelines
  • Policies & Statements
    Ethical Guidelines for Publication
    Academic Misconduct Statement
    Open Access (OA) Statement
    AIGC Use Statement
  • Journal Subscription
  • Download Center
  • 中文版
Cite this article:
WANG Jinkai,LI Xingtai,LYU Zhiguo,GUO Zhenmei.Pd/C catalyzes the hydrogenation of IBAP to IBPE[J].Journal Of Pharmaceutical Research,2019,38(3):156-158[Click to copy]
【Print this page】      【Download PDF Full Text】   【View/Add Comment】  【Download reader】  【 Close 】
←Previous|Next→ Archive    Advanced Search
This article has been viewed: 3556times   Download 2775次 QR Code for this article
Scan with your phone!
Pd/C催化对异丁基苯乙酮加氢生成对异丁基苯乙醇
王金凯1,李兴泰2,吕志果1,郭振美1
Font:Larger+|Default|Smaller-
(1.青岛科技大学,山东 青岛 266000;2.山东新华制药股份有限公司,山东 淄博 255000)
摘要:
目的 通过实验制得高收率的IBPE(对异丁基苯乙醇),为下一步羰基合成布洛芬提供较纯的反应物料。方法 以异丁苯为起始原料经付克酰基化自制的IBAP(对异丁基苯乙酮)通过加氢反应制得,并通过单因素实验法和正交实验法进行IBPE(对异丁基苯乙醇)合成工艺的研究。结果 30gIBAP,m(IBAP):m(甲醇)=1:3;T=30℃;P=0.8MPa;m(5%Pd/C)=2.4g ;m(NaOH(30%))=0.38g,反应时间3.2h,在此工艺条件下IBPE的收率可以达到96.5%。结论 反应温度大致为室温;一定范围内,随氢气压力和催化剂量的增加有利于对异丁基苯乙醇的生成,而NaOH作为一种烃的抑制剂存在。
关键词:  对异丁基苯乙醇  正交试验法  Pd/C
DOI:10.13506/j.cnki.jpr.2019.03.007
基金项目:山东省自然科学基金重点基础研究项目(No.ZR2017ZC0632)
Pd/C catalyzes the hydrogenation of IBAP to IBPE
WANG Jinkai1,LI Xingtai2,LYU Zhiguo1,GUO Zhenmei1
(1.Qingdao University of Science and Technology,Qingdao 266000,China;2.Shandong Xinhua Pharmaceutical Co., Ltd., Zibo 255000,China)
Abstract:
Objective A high yield of IBPE (p-isobutylphenylethanol) was prepared experimentally to provide a relatively pure reaction material for the next oxo synthesis of ibuprofen.Methods Isobutylbenzene was used as the starting material to prepare IBPE (p-isobutylacetophenone) by hydrogenation reaction, and IBPE was carried out by single factor experiment and orthogonal experiment. Study on the synthesis process of phenylethyl alcohol). Results 30 g IBAP, m (IBAP): m (methanol) = 1:3; T = 30 ℃; P = 0.8 MPa; m (5% Pd / C) = 2.4 g; m (NaOH (30%)) = 0.38 g The reaction time is 3.2 h, and the yield of IBPE can reach 96.5% under the process conditions.Conclusion The reaction temperature is approximately room temperature; within a certain range, the formation of isobutyl phenylethanol is favored with the increase of hydrogen pressure and catalyst amount, and NaOH exists as a hydrocarbon inhibitor.
Key words:  P-isobutyl phenyl alcohol  Orthogonal experiment  Pd/C
Today's Visits:468    Total Visits:2383167
Website copyright:Editorial Board of Journal of Pharmaceutical Research     鲁ICP备17018036号-3     鲁公网安备 37010202001351号
Sponsored by:Shandong Institute for Food and Drug Control Shandong Pharmaceutical Association Address:No.2749 Xinluo Street,High-Tech Zone,Jinan,P.R.China Postcode:250101
Telephone Number:0531-81216586 Email :yaoxueyanjiu@163.com;yaoxueyanjiu@126.com
Technical Support:Beijing Qinyun Technology Co., Ltd.