• Home
  • About Journal
    Journal Introduction
    Editorial Board
    Youth Editorial Board
    Cooperating Institutions
    Editorial Department
  • Submission Guidelines
  • Policies & Statements
    Ethical Guidelines for Publication
    Academic Misconduct Statement
    Open Access (OA) Statement
    AIGC Use Statement
  • Journal Subscription
  • Download Center
  • 中文版
Cite this article:
HU Wenjun,HE Yijing,LI Xiaodong.Study on the effect of heating factor on the determination of total polysaccharide in Ganoderma Lucidum Buccal Tablets[J].Journal Of Pharmaceutical Research,2020,39(7):373-376[Click to copy]
【Print this page】      【Download PDF Full Text】   【View/Add Comment】  【Download reader】  【 Close 】
←Previous|Next→ Archive    Advanced Search
This article has been viewed: 2693times   Download 2647次 QR Code for this article
Scan with your phone!
加热因素对灵芝含片总多糖含量测定的影响性研究
胡文军,何怡静,李孝栋
Font:Larger+|Default|Smaller-
(福建中医药大学药学院,福建 福州 350122)
摘要:
目的 对灵芝含片中总多糖的含量进行测定,考察加热因素对测试结果的影响。方法 以葡聚糖为对照品,采用硫酸苯酚比色法测定灵芝含片中总多糖的含量,对测定过程中直接冷却和加热后冷却对测定结果的影响进行考察。结果 直接冷却操作的线性回归方程为Y=0.014 6X-0.016 7,r=0.997 8,在15~50 μg·mL-1浓度范围呈良好线性关系,平均加样回收率为98.47%,RSD 2.70%,测得3批灵芝含片中总多糖含量分别为12.09、12.97、12.81 mg·g-1;加热后冷却的线性回归方程为Y=0.013 8X-0.033 5,r=0.997 7,在15~50 μg·mL-1浓度范围呈良好线性关系,平均加样回收率为98.32%,RSD1.78%,测得相同3批灵芝含片中总多糖含量分别为13.88、13.80、13.42 mg·g-1。结论 硫酸苯酚比色法操作中直接冷却和加热后冷却两种方法均可行,但总多糖在加热条件下,充分水解产生的衍生物和苯酚反应显色,测得的总多糖含量比不加热的要大,用于灵芝含片质量标准中总多糖的含量测定结果更准确。
关键词:  灵芝含片  总多糖  含量测定
DOI:10.13506/j.cnki.jpr.2020.07.001
基金项目:福建省科技平台建设项目(No.2010Y2004)
Study on the effect of heating factor on the determination of total polysaccharide in Ganoderma Lucidum Buccal Tablets
HU Wenjun,HE Yijing,LI Xiaodong
(College of Pharmacy, Fujian University of Traditional Chinese Medicine, Fuzhou 350122,China)
Abstract:
Objective To determine the content of total polysaccharide in Ganoderma lucidum Buccal Tablets, and investigate the effect of heating factor on the result.Methods The phenol-sulfuric acid method was used to determine the content of total polysaccharide in Ganoderma lucidum Buccal Tablets, in which the dextran was selected as the reference substance. And the two conditions of direct cooling and cooling after heating in the determination were investigated.Results The regression equation of direct cooling was Y=0.014 6X-0.016 7(r=0.997 8), and the linear relationship was good with the concentration range from 15 to 50 μg·mL-1. The average recovery rate was 98.47% with RSD of 2.70%. The contents of polysaccharides in three batches of Ganoderma lucidum buccal tablets were 12.09, 12.97and 12.81 mg·g-1, respectively. The regression equation of cooling after heating was Y=0.013 8X-0.033 5(r=0.997 7) with a good linear relationship of the concentration range from 15 to 50 μg·mL-1. The average recovery rate was 98.32% with RSD of 1.78%. The contents of polysaccharides in the same three batches of Ganoderma lucidum Buccal Tablets were 13.88, 13.80 and 13.42 mg·g-1, respectively.Conclusion Both direct cooling and cooling after heating in the operation of phenol-sulfuric acid method are feasible. However, the content of total polysaccharide determined by cooling after heating was larger than that of direct cooling. The reason is total polysaccharide can be fully hydrolyzed to produce derivatives in the course of heating, and then engender color reaction with phenol. As a result, it will be more accurate that the phenol-sulfuric acid method with cooling after heating for the determination of total polysaccharide in the quality standard of Ganoderma lucidum Buccal Tablets.
Key words:  Ganoderma Lucidum Buccal Tablets  Total polysaccharide  Determination
Today's Visits:509    Total Visits:2383239
Website copyright:Editorial Board of Journal of Pharmaceutical Research     鲁ICP备17018036号-3     鲁公网安备 37010202001351号
Sponsored by:Shandong Institute for Food and Drug Control Shandong Pharmaceutical Association Address:No.2749 Xinluo Street,High-Tech Zone,Jinan,P.R.China Postcode:250101
Telephone Number:0531-81216586 Email :yaoxueyanjiu@163.com;yaoxueyanjiu@126.com
Technical Support:Beijing Qinyun Technology Co., Ltd.