• Home
  • About Journal
    Journal Introduction
    Editorial Board
    Youth Editorial Board
    Cooperating Institutions
    Editorial Department
  • Submission Guidelines
  • Policies & Statements
    Ethical Guidelines for Publication
    Academic Misconduct Statement
    Open Access (OA) Statement
    AIGC Use Statement
  • Journal Subscription
  • Download Center
  • 中文版
Cite this article:
LIU Yuhong,JIANG Yu,HAO Guizhou,LIU Shankui.Optimization of preparation process of cabazitaxel liposomes by extrusion method[J].Journal Of Pharmaceutical Research,2023,42(4):243-246,284[Click to copy]
【Print this page】      【Download PDF Full Text】   【View/Add Comment】  【Download reader】  【 Close 】
←Previous|Next→ Archive    Advanced Search
This article has been viewed: 2258times   Download 2414次 QR Code for this article
Scan with your phone!
挤出法制备卡巴他赛脂质体的工艺优化
柳宇红1,姜宇2,郝贵周2,刘善奎1
Font:Larger+|Default|Smaller-
(1.济南大学生物科学与技术学院,山东 济南 250022;2.山东新时代药业有限公司科研部,山东 临沂 273400)
摘要:
目的 对挤出法制备卡巴他赛脂质体的挤出工艺进行优化。方法 以产品的平均粒径(MD)和多分散指数(PDI)为评价指标,采用正交设计法和部分正交析因法来筛选最优工艺参数。结果 最优挤出工艺参数为:核孔膜组合200 nm + 80 nm(单层或双层),挤出次数组合3 + 3或3 + 2,挤出温度10 ~ 23 ℃,挤出时间控制在18 h内,挤出压力0.5 ~ 1.2 MPa。结论 采用最优挤出工艺参数可以成功制得MD值和PDI值均符合规定标准且储存稳定性良好的卡巴他赛脂质体产品。
关键词:  卡巴他赛脂质体  挤出法  正交设计法  部分正交析因法  平均粒径  多分散指数
DOI:10.13506/j.cnki.jpr.2023.04.006
基金项目:山东省重大科技创新工程项目(No.2019JZZY011116)
Optimization of preparation process of cabazitaxel liposomes by extrusion method
LIU Yuhong1,JIANG Yu2,HAO Guizhou2,LIU Shankui1
(1. School of Biological Science and Technology, University of Jinan, Jinan 250022, China;2. Scientific Research Department of Shandong New Times Pharmaceutical Co., Ltd., Linyi 273400, China)
Abstract:
Objective To evaluate the possibility of achieving long-term diffusion-based delivery of proanthocyanidins (PAC) via surface-mediated method.Methods PAC was dissolved in deionized water, and the PAC aqueous solution was mixed with chloroform. The mixture was then emulsified by using the ultrasonic emulsification instrument to make the inverse emulsion with PAC dispersed in the emulsion droplets. The as-prepared inverse emulsion was cast onto the flat film made from polystyrene under the environmental condition of high humidity. After complete solidification, the obtained film was rendered with multi-layered porous structure. Drug release profiling experiments were performed by immersing the PAC-loaded film in phosphate buffer saline (PBS). At the predetermined time-points, the PBS solutions were analyzed by ultraviolet-visible spectrophotometry to calculate the percentage of PAC release. Testing period lasted for 28 days. Results By using the inverse-emulsion casting method, PAC-loaded polymeric film with asymmetric multi-layered micro-porous structures was facilely prepared. Dynamic morphological manipulation on the created porous structures was achieved by tuning the composition of the casting emulsion. By using fluorescent probe combined with confocal laser scanning microscopy, the hydrophilic component was proved to be efficiently dispersed within the porous structures both in the surface and bulk layers. The PAC-loaded film samples with different features of multi-layered porous structures were proved to be able to achieve sustained drug release behavior for more than 28 days, following Fickian diffusion mechanism.Conclusion By the design of porous film or coating as drug carriers, the effective drug loading and long-lasting drug delivery could be achieved. It provides insight for the construction of an efficient and flexible drug delivery platform.
Key words:  Cabazitaxel liposomes  Extrusion method  Orthogonal design method  Partial orthogonal factorial method  Mean diameter  Polydispersity index
Today's Visits:488    Total Visits:2383203
Website copyright:Editorial Board of Journal of Pharmaceutical Research     鲁ICP备17018036号-3     鲁公网安备 37010202001351号
Sponsored by:Shandong Institute for Food and Drug Control Shandong Pharmaceutical Association Address:No.2749 Xinluo Street,High-Tech Zone,Jinan,P.R.China Postcode:250101
Telephone Number:0531-81216586 Email :yaoxueyanjiu@163.com;yaoxueyanjiu@126.com
Technical Support:Beijing Qinyun Technology Co., Ltd.