• Home
  • About Journal
    Journal Introduction
    Editorial Board
    Youth Editorial Board
    Cooperating Institutions
    Editorial Department
  • Submission Guidelines
  • Policies & Statements
    Ethical Guidelines for Publication
    Academic Misconduct Statement
    Open Access (OA) Statement
    AIGC Use Statement
  • Journal Subscription
  • Download Center
  • 中文版
Cite this article:
HUANG Cuiping,WANG Yuqing,ZHANG Na.Optimization of the production process of Citicoline Sodium Injection based on QbD[J].Journal Of Pharmaceutical Research,2024,43(5):444-448,486[Click to copy]
【Print this page】      【Download PDF Full Text】   【View/Add Comment】  【Download reader】  【 Close 】
←Previous|Next→ Archive    Advanced Search
This article has been viewed: 3111times   Download 2793次 QR Code for this article
Scan with your phone!
基于QbD理念优化胞磷胆碱钠注射液生产工艺
黄翠苹,王玉青,张娜
Font:Larger+|Default|Smaller-
(华润双鹤利民药业<济南>有限公司,山东 济南 250200)
摘要:
目的 基于质量源于设计(QbD)的理念,对胞磷胆碱钠注射液的生产工艺进行优化,确保产品安全、有效和质量可控。方法 基于QbD理念,确定胞磷胆碱钠注射液的质量概况(QTPP)、关键质量属性(CQA),结合对处方工艺变量的风险评估,对胞磷胆碱钠注射液进行配液、灭菌工艺研究,筛选并确定最佳工艺条件。结果 通过控制配液投料前注射用水温度40 ℃以下,调节pH值在6.2~8.0之间,采用终端灭菌工艺121 ℃/12 min,控制灭菌升温时间小于15 min,降温时间小于10 min,制备的产品质量符合要求。结论 化后工艺参数,可实现胞磷胆碱钠注射液终端灭菌,提高产品无菌水平,提高临床用药安全性。
关键词:  胞磷胆碱钠注射液  灭菌工艺  终端灭菌工艺  质量源于设计
DOI:10.13506/j.cnki.jpr.2024.05.006
基金项目:
Publication Date:May 25, 2024
Optimization of the production process of Citicoline Sodium Injection based on QbD
HUANG Cuiping,WANG Yuqing,ZHANG Na
(China Resources Double-Crane Limin Pharmaceutical Co., Ltd., Jinan 250200 ,China)
Abstract:
Objective Based on quality by design (QbD), the production process of Citicoline Sodium Injection was optimized to ensure product safety, effectiveness and quality control. Methods Based on the concept of QbD, the quality target product profile (QTPP) and the critical quality attributes (CQA) of Citicoline Sodium Injection were determined, and combined with the risk assessment of the process variables, the liquid dispensing and sterilization process of Citicoline Sodium Injection were studied, and the optimal process conditions were screened and determined.Results By controlling the temperature of water for injection below 40 ℃, adjusting the pH value between 6.2 and 8.0, using the terminal sterilization process 121 ℃/12 min, controlling the sterilization heating time less than 15 min, cooling time less than 10 min, the quality of the prepared products met the requirements.Conclusion Using the optimized process parameters, the terminal sterilization of citicoline Sodium Injection can be realized, the sterility level of the product can be improved, and the clinical drug safety can be improved.
Key words:  Citicoline Sodium Injection  Sterilization process  Terminal sterilization process
Today's Visits:488    Total Visits:2383203
Website copyright:Editorial Board of Journal of Pharmaceutical Research     鲁ICP备17018036号-3     鲁公网安备 37010202001351号
Sponsored by:Shandong Institute for Food and Drug Control Shandong Pharmaceutical Association Address:No.2749 Xinluo Street,High-Tech Zone,Jinan,P.R.China Postcode:250101
Telephone Number:0531-81216586 Email :yaoxueyanjiu@163.com;yaoxueyanjiu@126.com
Technical Support:Beijing Qinyun Technology Co., Ltd.