| 摘要: |
| 目的 制备胡桃醌脂质体,提高胡桃醌的稳定性、水溶性。方法 通过薄膜分散法制备胡桃醌脂质体,单因素筛选出较佳处方,进行正交试验,以包封率(entrapment efficiency, EE)为评价指标,考察膜材比(大豆磷脂:胆固醇)、脂药比(膜材:胡桃醌)、有机溶剂体积、超声温度等对包封率的影响,得出胡桃醌脂质体的最佳制备工艺。建立胡桃醌含量测定的高效液相色谱法,计算其包封率及载药量(drug loading,DL),并对优化后的胡桃醌脂质体进行质量评价。结果 胡桃醌脂质体的最优处方为大豆磷脂:胆固醇(5:1),脂药比(10:1),有机溶剂体积40 mL,超声温度4 ℃。所制备的胡桃醌脂质体为棕黄色的液体,平均粒径为327.6 nm,多分散性系数(polydispersity index, PDI)均值为0.016,Zeta电位均值为-48.4 mV。胡桃醌包封率均值为96.91%,相对标准偏差(RSD)为0.05%,载药量均值为6.317%,RSD为0.02%。胡桃醌脂质体溶液在4 ℃的温度条件下放置30 d后取样,渗漏率为4.72%。结论 本研究得出了稳定的胡桃醌脂质体的制备工艺,提高了胡桃醌的稳定性以及溶解度。 |
| 关键词: 胡桃醌 脂质体 薄膜分散法 正交试验 多分散性系数 包封率 载药量 |
| DOI:10.13506/j.cnki.jpr.2026.07.007 |
| 基金项目: |
|
Received Date:January 07, 2026
Revision Date:March 19, 2026
Publication Date:July 31, 2026
|
|
| Construction and evaluation of juglone liposomes as an antitumor active compound |
| WU Qian1,DAI Yumei2,DUAN Meitao2,REN Jungang2,SHI Weiguo1 |
| (1.School of Pharmacy,Jiamusi University, Jiamusi 154007, China;2.Functional and Clinical Translation Key Laboratory of Fujian Higher Education Institutions, Xiamen Medical College, Xiamen 361023, China) |
| Abstract: |
| Objective To prepare juglone liposomes to enhance the stability and water solubility of juglone. Methods Juglone liposomes were prepared using the thin-film dispersion method. A relatively optimal formulation was preliminarily screened through single-factor experiments, followed by an orthogonal test design. With the entrapment efficiency (EE) as the evaluation index, the effects of membrane material ratio (soybean phospholipid : cholesterol), lipid-to-drug ratio (membrane materials : juglone), organic solvent volume, and ultrasonic temperature on the entrapment efficiency were investigated to determine the optimal preparation process for juglone liposomes. A high-performance liquid chromatography (HPLC) method was established for the determination of juglone content, and its entrapment efficiency and drug loading (DL) were calculated. Quality evaluation was performed on the optimized juglone liposomes.Results The optimal formulation of juglone liposomes was lipid to cholesterol ratio of 5:1, lipid material to juglone ratio of 10:1, 40 mL organic solvent volume, and ultrasound temperature of 4 ℃. The prepared juglone liposomes were brownish-yellow liquid with good fluidity, an average particle size of 327.6 nm, a polydispersity index (PDI) of 0.016, and an average Zeta potential of -48.4 mV. The average encapsulation efficiency of juglone was 96.91%, with an RSD of 0.05%, and the average drug loading was 6.317%, with an RSD of 0.02%. The leakage rate of juglone liposomes after being placed at 4 ℃ for 30 days was 4.72%. Conclusion This study established a stable preparation process for juglone liposomes, enhancing both the stability and solubility of juglone. |
| Key words: Juglone Liposomes Thin film dispersion method Orthogonal design PDI Encapsulation efficiency Drug loading |